|
Specification |
|
|
Lithium battery |
2~6 series |
|
Discharg current |
max. 500mA |
|
Over-charging |
auto cut-off |
|
Power consumption |
approx. 700uA |
|
(at 'Sleep mode') |
approx. 200uA |
|
Weight |
60g |
|
Dimension |
110x60x20 mm |
click the picture to enlarge
- Perfect balancing the Lithium battery(Li-Po, Li-Io, Li-Fe) with maximum accuracy
It monitors the voltages of each cell during the charge process to equalize the peak voltage.
We guarantee the final voltages are nomalized with an accuracy less than 0.01V.
PB-6 can be used with any brands of charger but you had better use it being linked with e-STATION chargers.
- High circuit power that enables fast-balancing
PB-6 adopts bigger capacity of circuit to perform balancing rapidly. It can drain the current from each cell up to 500mA at a time. It is very essential for balancing the larger capacity of batteries.
- Capable of self-balancing without a charger
PB-6 can be self-operative without linking to charger. When you connect the battery pack to the individual port of PB-6 the balancing job will be started instantly. In this case the individual cell voltages will be equalized to the least cell voltage of the battery pack.
- Maximum safety
If the voltage of any one of the cells raises higher than 4.3V by any reason the circuit-breaker operates automatically.
- Dual link for more than 6S battery pack
PB6 can balance up to 12S Lithium battery pack when two units are linked together.
|
Accessories |
||
|
8-pin cable for self-made connection |
Optional |
|
|
PB5/PB6 charger link cable |
Optional |
|
|
Connection board for PolyQuest-type (2S~6S) |
Optional |
|
|
Connection board for Align/Dualsky-type (2S~6S) |
Optional |
|
|
Connection board for Kokam/Graupner/Robbe-type (2S~6S) |
Optional |
|
|
Connection board for ThunderPower/MPX/FlightPower-type (2S~6S) |
Optional |
|
|
PB6 Dual link cable (4-pin) |
Optional |
|
