|
User's setting-up parameters |
|
|
Lithium battery voltage type |
3.6 or 3.7 volt per cell |
|
NiCd Delta-peak voltage sensitivity |
1 to 15mV |
|
NiMH Delta-peak voltage sensitivity |
1 to 15mV |
|
Battery temperature cut-off |
20 to 80C or OFF |
|
Waste time between charge/discharge |
1 to 60 min. |
|
Trickle charge mode |
ON/OFF |
|
Integral timer limit for safety |
10 to 720 min.or OFF |
|
Maximum charging capacity limit for safety |
10 to 9990mAh or OFF |
|
Key beep and buzzer sound |
ON/OFF |
|
Input power low alert |
1 to 11V |
|
LCD back-light brightness |
1 to 100 steps |
|
Specification |
|
|
Operating voltage |
DC 11~18 volts |
|
Charge/discharge power |
max. 80/10W |
|
NiCd/MH |
1~14 cells |
|
Li-ion/polymer |
1~5 series |
|
Pb |
2~12V |
|
Charge current |
0.1 to 5.0A |
|
Discharg current |
0.1 to 2.0A |
|
No. of cycle |
1 to 5 times |
|
Battery data memory |
up to 10 data |
|
Weight |
350g |
|
Dimension |
130x90x28 mm |
click the picture to enlarge
- USB port
We provide the program analyzes the charge/discharge process at your PC
You can see the curves of current and voltage at your PC when the charger links to PC via USB
- Temperature sensor
The processor monitors the temperature of the battery being charged or discharged during the process
For safety reason, the charger can stop the process at high temperature by your set up
You can adjust the brightness of LCD display
- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
|
Accessories |
||
|
Temperature sensor cable |
Optional |
|
|
4mm gold banana plug with silicon cable |
Standard |
|
|
PB-5 link cable |
Optional |
|
|
Charge graph program kit (CD + USB cable) |
Optional |
|
