ELD150   External Discharge Load for e-STATION 902

 

 Type 1:  R 0.5 Ohm  150W  for  NiXX  ~ 8cells, LiPo  ~ 3S

 Type 2:  R 1.5 Ohm  150W  for  NiXX  ~ 14cells, LiPo  ~ 4S

 

EAC100   Charger program kit (Software CD + USB cable)

 

 Windows program for e-STATION chargers (902, 701 and 501DX)

 USB link cable(120cm long)

 Program function; Charge/discharge graph on real time

                             Volts/Amps/Capacity/Temperature curves

                             Date/time, Input voltage

                             Voltages of individual cell

 

*Copyright reserved Bantam Inc.  Unauthorized copy of software is strictly prohibited.

EAC110   Temperature sensor cable

EAC114   PB5/PB6 link cable to charger

 

 Length: 300mm

 Communication link cable from PB5/PB6 to charger

EAC116   4mm gold banana jack with 16 gauge silicon cable

 

 Length: 100mm

 High quality cable for the charger output

EAC117   Charging cable with 4mm gold banana jacks and alligator clips

 

 Length: 300mm

 High quality cable for the charger output

EAC120   8-pin cable for PB5/BC5 and PB6/BC6/BC6-10 (for self-made)

 

 Individual connecting cable to output of each cell of battery pack

 Connection diagram    

EAC123/124/128/129  Balancing plug adaptor boards for BC5, BC6, BC6-10 and PB6 (2S~6S)

 

 * See 'Battery Tap Configuration Guide' at 'Support' page.

 

      

 

EAC130   PB-6 dual link cable

 

 To link two PB-6 together

EAC131   9-pin cable for BC8

 

 Individual connecting cable to output of each cell of battery pack for BC8

 Connection diagram    

EAC133/134/138/139  Balancing plug adaptor boards for BC8 (2S~6S)

 

 * See 'Battery Tap Configuration Guide' at 'Support' page.

 

      

 

EAC143/144/148/149  Balancing plug adaptor board for multi-battery link (2X3S, 3X2S) for BC6 and BC6-10

 

 * See 'Battery Tap Configuration Guide' at 'Support' page.

 

         

 

  Instructions   

 

EAC153/154/158/159  Balancing plug adaptor board for multi-battery link (2X3S, 3X2S) for BC8

 

 * See 'Battery Tap Configuration Guide' at 'Support' page.

 

         

 

  Instructions   

EAC200   Charger program kit (Software CD + USB cable)

 

 Windows program for e-STATION chargers (BC6, BC6-10 and BC8)

 USB link cable(120cm long)

 Program function; Charge/discharge graph on real time

                             Volts/Amps/Capacity/Temperature curves

                             Date/time, Input voltage

                             Voltages of individual cell

 

 

 *Copyright reserved Bantam Inc.  Unauthorized copy of software is strictly prohibited.

EAC302   4mm gold banana jack

 

 two males